Samsung 850 EVO SSD With 3rd Gen 48 Layer V-NAND Performance Comparison

REAL WORLD FILE TRANSFER

Finally, we wanted to see how performance was in a real world use when transferring large files to the SSDs. For this test we are going to simply stress write performance by transferring over a 30GB folder of movies off of one SSD to this one and time how long it takes. Next we are going to take the same files and copy them from the drive to itself for a mixed read/write workload. Once complete we can calculate the average speed for each.

Samsung 850 EVO 3D V-NAND V3 Real World Transfer

During the write only portion the new Samsung 850 EVO displayed a write speed that averaged 12MB/s greater more than the original, reaching 431MB/s. Looking at the copy results on the other hand, it averaged about 12MB/s less than the original, reaching 222MB/s.

POWER CONSUMPTION

For our power consumption testing, we have the drive connected to the system as a secondary drive. To record the wattage, we are now utilizing a Quarch Technology Programmable Power Module. It allows us to accurately measure power consumption over time and is flexible enough to allow us to test any SSD that comes our way.

Quarch Technology Power Module Angle

Our power analysis may change as time goes on, but for now we are looking at just a few metrics with the main goal of measuring our results against the manufacturer’s ratings. One, idle power consumption. Because most consumer systems are at idle for about 80% of the time, idle power consumption is an important measure to look at when understanding the efficiency of a drive. Next we look at startup consumption. This tells you how much power the device needs during startup and while it is usually more important when looking at HDDs and enterprise class storage, it is still something worth quantifying. After that we did averaged out the active power consumption from the 30GB file transfers. Finally, we went through our power logs during testing and listed the maximum power draw.

Samsung 850 EVO 3D V-NAND V3 Power

Here we can see where this new NAND revision shines, that is, in energy efficiency! Across all tests we see power consumption is lowered by about 30%, just as Samsung stated. The startup and file transfers power consumption averaged about 2W. Idle power consumption was just 31 milliwatts. Furthermore, max power consumption was very well regulated, reaching just over 3W! We are quite impressed with these results.

REPORT ANALYSIS AND FINAL THOUGHTS

Overall, today’s results were not too surprising. Samsung did state that the performance would be equal to if not better with the latest switch to this 48-layer NAND. Across all our tests we saw similar sequential speeds and slightly improved small file size and random performance. In PCMark we saw very close results once again and in PCMark 8 the average bandwidth was even improved upon over the original with higher average throughput and lower latency. Moving onto the real world file transfer and copy tests we saw mixed results. After writing our 30GB test file to the drives the result was that the latest 850 EVO was faster by 12MB/s, however, when copying the files to itself it was slower by 12MB/s. Finally, when we took a look at power consumption it was clear as day as to how much this newer third generation V-NAND and PCB design has allowed for greater efficiency. In all metrics the new Samsung 850 EVO consumed significantly less power, approximately 30% less than that of the original.

Samsung 850 EVO V2 NAND

FINAL THOUGHTS

Unlike companies have done in the past, Samsung is very forthcoming when it comes to updating the NAND flash within their 850 EVO line up.  Back at Samsung’s SSD Global Summit they have even “promised that they will only implement this change in a way that increases the performance and decreases the power consumption of these products.” We are happy to report that for the most part this statement holds true. Overall, performance has improved and power consumption went down with this transition to the newest 48-layer TLC V-NAND. So, if you are in the market for a Samsung 850 EVO there is no need to worry about whether you get the original with 32L TLC V-NAND nor not, though it would be our preference to get a hold of the latest version if possible. Now all that is left is to see how the rest of their SSD line up will be affected if/when they are updated to 48-layer V-NAND as well.

User Rating: 4.55 ( 11 votes)

4
Leave a Reply

avatar
3 Comment threads
1 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
4 Comment authors
sam0David Becerrahbadger30lorki Recent comment authors
  Subscribe  
newest oldest most voted
Notify of
lorki
Guest
lorki

Apart from the fewer nand packages, do you think the power consumption improvement could be attributed to the controller?

The controller package seems smaller on the newer version. Do you know if it’s a new revision, or just a shrink to a new smaller node? Probably the latter i suppose, although a new revision might be needed for the 4tb model.

hbadger30
Guest
hbadger30

Hi there,

Can anyone tell me where to purchase these new 48-layer V-NAND drives? I’ve looked on Amazon and it seems they are still selling the 32 – layer versions. Anyone got a link (specifically for the 1Tb model)??

Thanks in advance.

sam0
Guest
sam0

Versions can be seen from the revised packaging: Instead of the orange lettering “Powered by 3D V-NAND Technology” now adorns a “V-NAND” lettering with blue “V” on the box.

David Becerra
Guest
David Becerra

thats why sequential minimally regressed but random improved